|
Service Cranes – mounted on the corner of a reinforced body.
Venco-Venturo:
CT2003FB/CT2004FB/CT2005
CT2003FB
Maxiumum Capacity: 2000 lbs @ 3’
Manual extension boom: 3’-5’ folds for storage
CT2004FB
Maximum Capacity: 1500 lbs. @ 4’
Manual extension boom: 4’-7’ folds for storage
CT2005
Maximum Capacity: 1200 lbs. @ 5’
Manual extension boom: 5’-9’ non-folding
12 Volt DC Heavy duty motor
1200 lbs. single line capacity, 200 lbs double line capacity
Heavy duty self-locking bronze worm gear reduction running in oil with self-
adjusting oil cooled mechanical brakes to provide controlled load lowering
Winch Drum has tapered flanges and cheek plates to reduce wire rope
tangle
Re-buildable winch gearbox minimizes maintenance costs
Meets ANSI B30.5 safety standards
3/16” x 35’ aircraft grade wire rope with 4200 lbs. breaking strength. (Drum
will accept optional cable lengths up to 75’)
Snatch block with swivel hook and safety latch for loads exceeding 1200 lbs.
Pistol grip, weather-proof, removable pendant control with 15’ cord
ET6KM/ET6KR
ET6KM
Maunal Rotation
Power Elevation
ET6KR
Power Rotation
Power Elevation
Venturo electric powered high efficiency winch with heavy
duty self locking bronze worm gear system and built-in brake to prevent
coasting (ANSI B30.5).
360 degree continuous rotation, precision braking for maximum control of
load positioning.
Electric hydraulic boom elevation with load holding check valve and solenoid
operated release valve (ANSI B30.5).
Remote control pendant: Environmentally sealed switches, 20 ft.cord with
quick disconnect plug.
6’ primary boom extending to 14’ using two manual extensions.
ET10KX
3,200 lbs. lifting capacity
10,800 ft/lb. overturning moment (1200 lbs. capacity at 9 ft.). Actual
overturning moment varies with boom angle, extension and stability of
chassis.
Electric: Hydraulic Power.
Electric Winch: With automatic one-way braking that controls the load going
down & with no drag going up.
Electric Hydraulic Boom Elevation: With solenoid lock valve on cylinder
(ANSI B30.5).
Manual or Hydraulic Boom Elevation: 7 to 11 ft. Manual boom extension from
11 to 15 ft.
Pilot operated check valve and pressure compensated control valve: To
control boom during retraction on KX model (ANSI B30.5).
Continuous 360° Power Rotation: With coast limiting brake.
Remote Control Pendant: Environmentally sealed switches. 20 ft. cord with
quick disconnect plug.
Cable Drum: Tapered flanges and tangle free cheek plates. First wrap
diameter 18 times 7/32" wire rope diameter. Drum width 4 ¼”. (ANSI B30.5)
Sheave Diameters: Boom and swivel block – 18 times 7/32" wire rope
diameter. (ANSI B30.5)
ET18KX/HT18KX
4,500 lb maximum lifting capacity
18,000 ft/lb moment rating
Electric/Hydraulic Power
Power Boom Extension 8’ – 12’
Manual Boom Extension 12’ – 16’
Power Rotation: Continuous - 360°
Meets ANSI B30.5 Safety Standards
Meets OSHA 1910.180 Requirements
ET25KX/HT25KX
Boom Length 10-16-20 ft.
(25K) 10 ft. primary boom with 6 ft. manual extension to 16 ft. and 4
ft. manual extension to 20 ft.
(25KX) 10 ft. primary boom with 6 ft. HYDRAULIC extension to 16 ft.
and 4 ft. manual extension to 20 ft.
Available in your choice of Venturo electric powered high efficient 5,000 lb.
winch with heavy-duty self-locking bronze worm gear system and built-in
brake to prevent coasting (ET Series) or full hydraulic high efficient brake
valve and multi-disc wet brake with sprag (HT Series). (ANSI B30.5)
Power Rotation – 360° continuous electric rotation with precision braking for
maximum control of load positioning
(ET Series) or 400° rotation with cross over relief valve (HT Series).
Load Holding Check Valves on elevation and extension cylinders. (ANSI
B30.5)
Remote Control Pendant – environmentally sealed switches with 24 ft. cord
and quick disconnect switch.
Pressure Compensated Flow Control Valves – elevation and extension
cylinders.
HT50KX/HT40KX
HT50KX
Lifting Capacity: 8,000 lbs
Crane Rating: 50,000 ft/lbs
HT40KX
Lifting Capacity: 6,000 lbs
Crane Rating: 40,000 ft/lbs.
Boom Length 10 – 16 – 20 ft.
10 ft. primary boom with 6 ft. Hydraulic extension to 16 ft. and 4 ft. manual
extension to 20 ft.
Winch – Full hydraulic high efficiency planetary winch with hydraulic brake
valve and multi-disc wet brake with sprag.
400° rotation.
Load Holding Counterbalance Valves on elevation and extension cylinders.
(ANSI B30.5)
Remote Control Pendant – environmentally sealed switches with 25 ft. cord
and quick disconnect plug.
Priority Flow Control Valves – elevation and extension cylinders.
IMT Models:
|
