|
TSE Products
Tensioners
U-Mount
Model 3502:
Tensioner Type: Single Bullwheel “V” Groove
Rated Tension: 3000 libs. @ 4mph
Bullwheel Size: 36” diameter
Linings: Single Groove Replaceable, Urethane
Max. Cond. Dia.: 1.75”
Tensioning Brake(s): 36” dia Bronze Disc
Module Length: 48”
Module Width: 34”
Module Height: 52”
Weight: 500 lbs.
Model 3504
Tensioner Type: Double Bullwheel Multi-Groove
Rated Tension: 3000 lbs. @ 4 mph
Bullwheel Size: 36” diameter
Linings: 4 Groove Replaceable, Urethane
Max. Cond. Dia.: 1.25”
Tensioning Brake(s): 2 – 24” dia Bronze Disc
Module Length: 50”
Module Width: 45”
Module Height: 58”
Weight: 900 lbs.
T30/36 BWRC
Smooth control of conductors up to 3000 lbs.
Hydraulic bronze disc brakes with equal retarding to each bullwheel
Open reeve bullwheels for easy conductor installation and removal
36” bullwheel with replaceable urethane lining segments
Tail fairlead with 3 rubber lined rollers
Tandem axle with leaf spring suspension
Reel capacity up to 72” diameter, 54” wide and 7,000 lbs.
Quick change reel shaft with straight vertical lift
16” bronze disc reel brake with manual caliper
T30H/36 BWRC
Continuous performance of 3,000 lbs. tension at 4 mph
Two 36” bull wheels each with 1.3” grooves
Mounted on Timken bearings
Bolt on replaceable urethane lining segments
3 Roller fairlead
Pressure gauge and performance chart
Open reeved for easy installation and removal for conductor
Tongue and rear stabilizer jacks
Tandem axle with lead spring suspension
Pintle hitch adjustable to four height positions
2-5/8” reel shaft with double drive arm and lifting loop
16” ventilated bronze disc reel shaft brake
High speed pilot rope rewind with infinite speed control
Quick change reel shaft design
T30/36 VGRC
Continuous performance of 3000 lbs. tension at 4 mph
A single V-Groove bullwheel 36” in diameter with 1.75” groove width
Mounted on Timken bearings
Bolt on replaceable urethane lining segments
36” bronze disc bullwheel brake
3 Roller fairlead
Pressure gauge and performance chart
Open reeved for easy installation and removal of conductor
Tongue and rear stabilizer jacks
Tandem axle with leaf spring suspension
Pintle hitch adjustable to four height positions
2-5/8” real shaft with double drive arm and lifting loop
16” ventilated bronze disc reel shaft brake
Quick change reel shaft design
T30H/36 VGRC
Continuous performance of 3000 lbs. tension at 4 mph
A single V-Groove bullwheel 36” in diameter with 1.75” groove width
Mounted on Timken bearings
Bolt on replaceable urethane lining segments
3 Roller fairlead
Pressure gauge and performance chart
Open reeved for easy installation and removal of conductor
Tongue and rear stabilizer jacks
Tandem axle with leaf spring suspension
Pintle hitch adjustable to four height positions
2-5/8” real shaft with double drive arm and lifting loop
16” ventilated bronze disc reel shaft brake
High speed pilot rope rewind with infinite speed control
Quick change reel shaft design
T50/42 BWRC & T50/48 VWRC
Smooth tensioning of conductors
Quick change reel shaft system 16” bronze disc reel brake with manual
caliper
Highway lighting
Replaceable synthetic lining segments
Tandem axle with leaf spring suspension
Reel capacity 90” diameter, 53” wide and 11,000 lbs.
Adjustable tow eye, safety chains
One front and two rear manual jacks
Hydraulic disc brakes, equal retarding to bullwheels
Tail fairlead with 3 rubber lined rollers
T50/52 BWRC
Maximum continuous tension: 5,000 lbs @ 4mph
Bullwheel Diameter: 52”
Groove Diameter:1.5”
Number of grooves: 5 per bullwheel
Maxiumum reel diameter: 96”
Maximum reel width 54”
Maximum reel width with hydraulic rewind: 52”
Maximum reel weight: 12,500 lbs
Reel shaft diameter: 2-5/8”
T50/60 Bullwheel Tensioner
Maximum continuous tension: 5,000 lbs @ 4 mph
Bullwheel Diameter: 60”
Groove Diameter: 1.5”
Number of grooves: 5 per bullwheel
T50/60-2H
Puller/Tensioners
DPT 30B
Proven hydrostatic pulling and tensioning system with a hydraulic oil cooler
27 HP water-cooled diesel engine
Reel capacity up to 72” diameter, 54” wide and 6,000 lbs
Tandem axle with leaf spring suspension
Infinitely variable linespeed and linepull control
Free wheeling disconnect for high speed rope pull out
Spring applied-hyraulic pressure released holding brake
Central operator’s position for maximum safety and visibility
Operator’s seat with horizontal and vertical adjustments
Quick change reel shaft with straight vertical lift
Engraved operator’s console
DPT 40
Proven hydrostatic pulling and tensioning system with hydraulic oil cooler
72 HP water-cooled diesel engine
Reel capacity up to 72” diameter, 54” wide and 6,000 lbs
Tandem axle with leaf spring suspension
Infinitely variable linespeed and linepull control
Free wheeling disconnect for high speed rope pull out
Spring applied-hyraulic pressure released holding brake
Central operator’s position for maximum safety and visibility
Operator’s seat with horizontal and vertical adjustments
Quick change reel shaft with straight vertical lift
Engraved operator’s console
Mechanical bronze overspin payout brake
DPT 40B
Proven hydrostatic pulling and tensioning system with hydraulic oil cooler
44 HP water-cooled diesel engine
Reel capacity up to 72” diameter, 54” wide and 6,000 lbs
Tandem axle with leaf spring suspension
Infinitely variable linespeed and linepull control
Free wheeling disconnect for high speed rope pull out
Spring applied-hydraulic pressure released holding brake
Central operator’s position for maximum safety and visibility
Operator’s seat with horizontal and vertical adjustments
Quick change reel shaft with straight vertical lift
Engraved operator’s console
DPT 60/70
Proven hydrostatic pulling and tensioning system with hydraulic oil cooler
100 HP water-cooled diesel engine
Reel capacity up to 72” diameter, 54” wide and 6,000 lbs
Reel shaft diameter of 3-1/2”
Tandem axle with leaf spring suspension
Infinitely variable linespeed and linepull control
Free wheeling disconnect for high speed rope pull out
Spring applied-hydraulic pressure released holding brake
Central operator’s position for maximum safety and visibility
Quick change reel shaft with straight vertical lift
Engraved operator’s console
PTV 60-54
Maximum continuous linepull: 5,000 lbs @ 4mph
Maximum intermittent linepull: 6,000 lbs
Linespeed: 0-4 mph variable
Engine: 100 HP Diesel
Bullwheel diameter: 54”
Bottom of groove diameter: 48”
Maximum reel size: 96”x56”
Maximum reel weight (highway): 11,000 lbs
Maximum reel weight (jobsite): 16,000 lbs
Unit Weight w/o reel: 9,500 lbs approx
Tow eye weight w/o reel: 2,000 lbs approx
Unit dimensions (approx): 26’ 5/8”L, 8’ ¼”W, 11’H
PTV 100-72
Maximum continuous linepull: 10,000 lbs @ 4mph
Maximum intermittent linepull: 11,000 lbs
Linespeed: 0-4 mph variable
Engine: 165 HP Diesel
Bullwheel diameter: 72”
Bottom of groove diameter: 65-1/2”
Maximum reel size: 96”x56”
Maximum reel weight (highway): 11,000 lbs
Maximum reel weight (jobsite): 16,000 lbs
Unit Weight w/o reel: 10,500 lbs approx
Unit dimensions (approx): 26’ 4”L, 8’ 4”W, 10’ 9”H
BWPT 120-60
Maximum continuous linepull: 12,000 lbs @ 4mph
Maximum intermittent linepull: 14,000 lbs
Linespeed: 0-5 mph variable
Engine: 160 HP Diesel
Bullwheel diameter: 60”
Bullwheel groove diameter: 1.5”
Maximum reel size 96”x68”
Overhead Pullers
Poleboss
Performance 1000 lbs linepull @ 400 fpm based on hydraulic supply of 15
gpm @ 200 psi
Precise metering spring to neutral control valve
Linepull limiting tension control valve
Hydraulic pressure gauge
Anti-rotation clutch
2 ratchet type web binder straps
Manual rope levelwind
Hydraulic quick disconnects
Poleboss drive unit weight 215 lbs.
Pick-up Boss
Performance 1,000 lbs
Linepull @ 120 m/min based on hydraulic supply of 15 gpm @ 2,000 psi
Precise metering spring to neutral control valve
Linepull limiting tension control valve
Hydraulic pressure gauge
Anti-rotation clutch
Easily installed in back of ½ ton or larger truck
Manual rope levelwind
Integral self-contained hydraulic power pack
Reliable 18 HP Honda gasoline engine
Conviently mounted control console
DP 10-4H
Single axle trailer with 5,200 lbs axle
18 HO air cooled engine
6 Gallon fuel tank
12 Gallon hydraulic tank
Diamond leadscrew levelwind
Free wheeling drums with disc drag brakes
Fine control manual calipers on drag brakes
Individual drum clutches
Anti-rotation device on drive system
DP 20-4H
2,000 lb linepull capacity on single full drum of rope
Proven hydrostatic pulling system with a hydraulic oil cooler
Four pulling reels, each with a capacity for 6,000’ of ½” or 10,000’ of 3/8”
diameter rope
27 HP water cooled diesel engine
Single axle with leaf spring suspension
Infinitely variable linespeed and linepull control
Mechanical clutch and mechanical bronze brake for each reel
Spring applied hydraulic pressure released holding brake
Central operator’s position for maximum safety and visibility
Deluxe, adjustable operator’s seat and protective screen
Engraved operator’s console
Swing out automatic diamond leadscrew levelwind adjustable for individual
use with all four reels
Steel lockable battery box
Front and rear drop leg mechanical jacks
Four Drums
Proven hydraulic pulling system with mechanical clutch for each drum
Water-cooled diesel engine
Infinitely variable linespeed and linepull control
Spring applied/hydraulic pressure released holding brake
Four heavy duty pulling drums, each with capacity for 10,000’ for 5/8”
diameter or 14,000’ of ½” diameter rope
Free-wheeling drum disconnect for high speed rope payout
Bronze overspin brake on each drum
Two hydraulic boon type levelwinds controlled from operator’s console
Central operator’s position for maximum safety and visibility with engraved
console panel
Tandem axle trailer with leaf spring suspension
DP 100
Maximum Continuous Linepull: 10,000 lbs. @ 4 mph
Maximum Intermittent Linepull: 12,000 lbs.
Linespeed: 0-5 mph variable
Engine: 165 HP Diesel
Drum Capacity: 12,000’ of 7/8” rope
DP165
Maximum Continuous Linepull: 15,000 lbs. @ 2.5 mph
8,600 lbs. @ 4 mph
Maximum Intermittent Linepull: 16,500 lbs
Linespeed: 0-5 mph variable
Engine: 180 HP Diesel
Drum Capacity: 17,000’ of 5/8” wire rope
Multi Drum Transmission
Maximum Continuous Linepull: 10,000 lbs. (full drum)
Maximum Intermittent Linepull: 12,000 lbs.
Linespeed: 0-4 mph
Engine: 185 HP Diesel
Drum Capacity: 29,000’ of 3/8” wire rope
16,000’ of 1/2” wire rope
10,000’ of 5/8” wire rope
DP 200
Maximum Continuous Linepull: 10,000 lbs. @ 4mph
20,000 lbs. @ 3.3mph
Maximum Intermittent Linepull: 24,000 lbs.
Linespeed: 0-5mph
Engine: 270 HP Diesel
Drum Capacity: 25,000’ of ½” rope
16,000 of 5/8” rope
11,000 of ¾” rope
DP 300
(2) 50 Gallon Fuel Reservoirs with Level Gauge
150 Gallon Hydraulic Reservoirs with Level Gauge and Temperature Gauge
Hydraulic Fan Driven Oil Cooler with Thermostat for Positive Heat
Dissipation
Heated and Air Conditioned Insulated Operator’s Cab
Elevated Operator’s Position for Full View of Pulling Operation
Automatic Diamond Leadscrew Levelwind System with Four Roller Fairlead
Hydraulic Controls for Remote Reel Winder
Unit Sandblasted, Primed and Painted with Two Coats of Enamel Finish
Paint
DP 500
Maximum Continuous Linepull: 30,000 lbs. @ 3mph
50,000 lbs. @ 2.1mph
Maximum Intermittent Linepull: 55,000 lbs.
Linespeed: 0-3.5mph
Engine: 430 HP Diesel
Drum Capacity: 32,000’ of 5/8” rope
22,000’ of ¾” rope
16,000’ of 7/8” rope
Underground Pullers
H-15 & M-15 Muler Drivers
CT 6-50
Maximum reel torque: 50,000 in lb
Maximum reel speed: 0 to 20rpm (infinitely variable)
Maximum reel diameter: 84”
Minimum reel diameter: 36”
Maximum reel width: 58”
Minimum reel width: 27”
Maximum reel weight: 8,500 lbs.
Engine power (diesel): 27 hp
CT 6-130
Maximum reel torque: 130,000 in. lb
Maximum reel speed: 0 to 12 rpm (infinitely variable)
Maximum reel diameter: 84”
Minimum reel diameter: 48”
Maximum reel width: 60”
Minimum reel width: 36”
Maximum reel weight: 8,500 lbs.
Engine power (diesel): 27 hp
CT 14
Maximum reel torque: 230,000 lbs. in.
Maximum reel speed: 0-12 rpm (infinitely variable)
Maximum reel diameter: 108”
Minimum reel diameter: 48”
Maximum reel width: 65”
Minimum reel width: 38”
Maximum reel weight: 16,000 lbs. (not legal for US Highways)
Engine Power: 44hp
UP 70 & UP 70B
7,000 lb maximum linepull
0-200 fpm maximum linespeed range
8” bullwheels with 5 grooves
Reel capacity of 3,000 ft. of 3/8” wire rope
Rope payout on demand
Automatic leadscrew levelwind
Swivelling rear fairlead
Remote emergency stop button
Overload cut-off
Pivoting rear jib with multi-positional roller
Tool box
27 hp water-cooled diesel engine on the UP-70
61 hp gasoline engine and 175 cfm air compressor combination on the
UP-70B
UP-70 MSK
7,000 lb maximum linepull
0-200 fpm maximum linespeed range
8” bullwheels with 5 grooves
Reel capacity of 3,000 ft of 3/8” wire rope
Rope payout on demand
Automatic leadscrew levelwind
Remote emergency stop button
Overload cut-off
High volume blower 875 cfm @ 15 psi
Hydraulic articulating mast that articulated 15 degrees each side of center,
extends 5 ft. to rear rotates 10 degrees from vertical and telescopes 10 ft.
into manhole.
UP 120
12,000 lb maximum linepull
0-300 fpm maximum linespeed range
12” bullwheels with 5 grooves
Reel capacity of 2,300 ft. of 9/16” wire rope
Rope payout on demand
Automatic leadscrew levelwind
Swivelling rear fairlead
Remote emergency stop button
Overload cut-off
Tool box
26 hp electric start gasoline engine on the UP-120
61 hp gasoline engine and 175 cfm air compressor combination on the
UP-120BHJ
PT 200/108-62 SL
Powerful twin drive rollers
Proven hydraulic drive system with oil cooler
Air cooled gasoline engine – 30 HP class
Tandem walking beam axles with capacity to carry 20,000 pounds reels
Infinitely variable linespeed and linepull
Bronze bearing mounted reel shaft complete with locking collars
Spring apply – hydraulic released holding brakes in roller drive assembly
Remote pendant controls to a 25 foot long cord for direct view of manhole
operation.
Urethane lining on drive rollers for excellent traction and wear
Rear wheel drive for the best in on-site maneuverability
Rubber tired nosewheel with full 360 degree swivel capabilities
Full enclosed lockable control cabinet
Hydraulic rear wheel lift to maneuver on the two front wheels – provides
better turning capabilities
Pilot Line Winders
Polemaster
Pole mounted brake spindle wit hot stick adjustable brake controller with
Chain or web binder (36 lbs).
Galvanized steel reel with 300 lbs linepull rating
Model 2811 reel for 3,000 ft of 3/8 in pilot rope (145 lbs.)
Model 2815 reel for 6,000 ft. of 3/8 in. pilot rope (186 lbs.)
Pilot rope 12 strand polypropylene, with 2,000 lbs. breaking strength, 3/8”
diameter x 3,000 ft. or 6,000 ft. lengths
2501 PLW
Standard leadscrew levelwinder
Free wheeling drums with disc drag brakes
Fine contol manual calipers on drag brakes
Individual drum clutches
Anti-rotation device on drive system
Optional trailers mounting
Transmission PLW
Hydraulic drive system for continuous infinitely variable speed and direction
control
Drum drive can be controlled from any point along the operator’s platform
Gas or diesel engines available
Individual clutches and brakes on each drum
Spring applied, hydraulic released holding brake to minimize possibility of
line pull loss in even of power failure.
Individual hydraulic boom levelwinds on each drum
Fifth wheel trailer includes swing down ladder, full length operator platform,
Landing gear, air axle brakes, highway lighting
|
